Horizontal Paper Covering Machine
The Horizontal 4 Paper Covering / Lapping Machine is suitable to lap maximum 4 layers of The lapping percentage i.e., over lap, butt lap and any percentage as per the customer specification can be obtained on this machine perfectly. The machine is also suitable to lap single layers of Poly film/ Nomex tape etc round the conductor as per IS/ BHEL specification
Technical Specification :-
• Capacity:- 3mm to 6mm round wire max. Upto 90 sq.mm strip max. [Min / Max Thickness – 1mm / 6mm, Min / Max Width – 5mm /20mm]
• Covering Capacity :- 4 Papers Max
• Machine operation :- Left to right, when the operator faces the machine or as per your requirement
• Paper Pad size :- Standard Size.
• Pay-off:- Roll-in-type with brake arrangement, suitable for the following Standard size steel bobbin Flange dia - 750mm. Bore dia - 130mm. Width bet. Flange - 280mm
• Take-up:- Suitable for the following standard bobbin size; Flange dia - 700 mm. ( Wooden Bobbin) Bore dia - 35/ 40 mm. Width bet. Flange - 280mm
• Automatic Traverse :- Rollring traverse system with infinite pitch adjustment.
• Spinner out fit :- One no. Eccentric Spinner of three paper pad holding and One no.Concentric spinner of one paper pad holding will be fitted with proper paper tension & paper guide arrangement
• Caterpillar unit :- Caterpillar unit with 600 mm haul –off length (approx) with one no. PIV (mechanical drive) will be provided to control the linear speed.
BASIC EQUIPMENT OF THE MACHINE:
• Roll in-type pay-off with brake arrangement:- 1 No.
• Straightening unit:- 1 set.
• Spinners for FOUR paper covering :- 2 Nos
• Caterpillar unit with gear box and PIV :- 1 No
• Take-up suitable to 250/280mm traverse :- 1 No
• 5 H.P AC motor for main drive with AC VF Drive. :- 1 No
Write Your Message or Query